How To Safely Drain A Pool Into Your Yard: A Beginner’s Guide

If you’re wondering, can I drain my pool into my yard? Draining a pool into your yard can be daunting, especially if you’ve never done it before. But it can be done safely and effectively with the right preparation and knowledge.

This guide will provide step-by-step instructions on safely draining a pool into your yard, including selecting the right location and equipment, preparing your yard, and ensuring proper drainage. With these tips, you can quickly drain your pool into your yard.

Can I Drain My Pool Into My Yard?

Draining your pool into your yard can be tricky if you’re unsure what to do. Whether your pool is brand new or decades old, there are certain steps you must take to properly and safely drain your pool into your yard. This guide will walk you through safely draining your pool into your yard, from properly preparing the pool for draining to properly disposing of the water.

Before you begin the draining process, it is important to assess the condition of the pool. Look for any signs of damage or cracks in the pool’s walls and floor. If any damage is found, it is important to repair it before you begin the draining process.

You should also check and adjust the pool’s pH levels as needed. If the pH levels are too high, add a pH reducer, which can be purchased at any pool supply store.

Once the pool is prepped and ready to drain, you should begin by removing any remaining debris or sediment from the pool. This can be done by using a pool vacuum or a skimmer.

After removing the debris, you should locate the drain plug at the bottom of the pool. Ensure the plug is in good condition, as a damaged plug can cause a dangerous leak.

Once the drain plug has been located, you should attach a garden hose to the drain outlet. The other end of the hose should be directed away from the pool and into the yard. When the hose is in place, you can slowly open the drain plug to begin draining. Monitoring the process is important to ensure the water drains evenly and without leaks.

Once the pool has been drained, turn off the hose and remove it from the drain outlet. The pool should then be thoroughly inspected for any damage or cracks that may have occurred during the draining process. If any damage is found, it is important to repair it before refilling the pool.

Finally, the water drained from the pool must be disposed of properly. If the water is clear, it can be safely dumped into a nearby drain or pond. If the water is cloudy or contains debris, it should be disposed of in a designated area away from water sources.

Choosing The Right Location For Pool Draining

Choosing The Right Location For Pool Draining

When choosing a location for the pool draining into your yard, you want to avoid any areas where the water may sit and cause damage or create a hazard. Here are some tips to help you make the right choice:

  • Look for a spot that is away from the foundation of your house and any other structures. You don’t want the water to seep into the foundation or cause erosion around your home.
  • Choose an area downhill from your pool so the water naturally flows away from your home and any other structures.
  • Avoid areas where the water may collect and create a safety hazard, such as near steps or walkways.
  • Consider the type of soil in the area you are choosing. If the soil is sandy or porous, the water will drain more quickly. If the soil is clay-heavy, the water may take longer to drain and could cause damage.
  • Be sure to check local regulations and guidelines for pool draining to ensure that you are following any necessary guidelines and not causing harm to the environment.

Preparing Your Yard For Pool Draining

It’s important to properly prepare your yard for pool draining to avoid any potential damage or flooding. Here are a few tips to help you get ready:

  • Check the drainage system in your yard to ensure it’s functioning properly. Ensure any excess water from pool draining can flow away from your house and neighboring properties.
  • Consider hiring a professional to drain the pool for you. They can ensure the water is safely and properly drained and help with yard preparation.
  • If you’re draining the pool, follow the manufacturer’s instructions and local regulations. Never drain pool water into storm drains or sewers.
  • Protect any plants around the pool or yard by covering them with plastic or moving them to a safe location. Pool water can contain chemicals that could harm plants.

Understanding Drainage Regulations

When draining your pool, it’s important to understand the drainage regulations in your area. Most cities and municipalities have specific guidelines for pool drainage to prevent flooding and ensure the community’s safety. Here are some general tips to keep in mind:

  • Check with your local government to understand the regulations for pool drainage in your area. Some cities may require a permit or special approval before you drain your pool.
  • Make sure you use a proper drainage system to prevent damage to your property or your neighbor’s.
  • Consider the environmental impact of draining your pool. If your pool water contains chemicals, properly dispose of it to avoid harming the ecosystem in your area.
  • If you’re unsure how to drain your pool properly, consider hiring a professional to guide you through the process and ensure you follow all applicable regulations.

Understanding Pool Pump Requirements

When draining a pool safely into your yard, understanding the requirements of your pool pump is a critical first step.

Before starting the draining process, you must ensure your pump can safely handle the water you need to drain. The size of the pump will depend on the size of your pool, as well as the rate of flow you require.

Additionally, you will need to make sure your pump is equipped with a filter that can handle the debris that may be present in the water. If your filter is not up to the task, it can clog, leading to serious damage to your pump.

When preparing to drain your pool, you must also ensure that the electrical connection is wired correctly and that the power supply is sufficient for the pump to run safely.

If you are unsure about the electrical requirements of your pool pump, it is best to consult a professional. Additionally, the location of the pump should be checked to ensure that it is not in an area prone to flooding or other potential water damage.

Once the pump is correctly wired and situated, it is time to start draining the pool. It is important to remember that the water should be drained slowly and steadily to avoid any damage to the pump or the surrounding area.

While the water drains, it is important to closely monitor the levels to ensure the pump is not overworked. If the pump struggles to keep up with the draining process, the flow should be decreased to prevent damage.

Installing A Drain In The Pool

Installing a drain in the pool is an important part of safely draining a pool into your yard. The first step is to locate the drain at the lowest part of the pool. This is usually at one end or the other and should be at least two feet below the water level.

Once the location has been determined, the pool can be drained using a sump or submersible pump. A sump pump is the most common choice, as it is easier to install and requires less maintenance. The sump pump should be connected to a garden hose, and the hose should be connected to the drain. The hose should be secured with clamps to ensure a tight fit.

Once the hose is connected to the drain, the sump pump can be operated. Before running the pump, it is important to check that the hose is securely connected and that the hose is in good condition. If the hose is damaged or not secure, the water may flow into the wrong area or cause water damage in the yard.

The water should be monitored closely when the pump runs to ensure it drains properly. If the water does not seem to be draining correctly, the pool may need to be cleaned, or the pump may need to be adjusted. Once the water has been drained, the pump should be removed and the hose disconnected.

When the pool is completely drained, the drain should be thoroughly cleaned and inspected for debris or damage. Once the drain is clear and in good condition, the pool can be refilled with clean water, and the sump pump can be used to fill the pool.

Establishing An Appropriate Drainage Path

Establishing An Appropriate Drainage Path

Establishing an appropriate drainage path is crucial for preventing water damage and maintaining the structural integrity of your property. Here are a few tips to help you establish an effective drainage path:

  • Assess your property and identify any areas prone to water accumulation, such as low spots or areas near the foundation of your house.
  • Plan the drainage path so water flows away from the house and towards a designated drainage area, such as a storm drain, dry well, or retention pond.
  • Install drainage systems such as French drains or swales to redirect water away from problem areas.
  • Maintain your drainage system regularly by removing debris and repairing damaged components to prevent clogs and leaks.

Setting Up Pool Filtration Equipment

Setting up pool filtration equipment can be daunting, but it’s essential for any pool owner. Here are the steps you need to follow to get started:

  1. Choose the right type of filter. There are three main types of pool filters: sand, cartridge, and DE. Each has its strengths and weaknesses, so research them thoroughly before deciding.
  2. Prepare the area where the filter and pump will be located. This should be a flat, stable surface protected from the elements and easily accessible.
  3. Install the pump. Connect the pump to the filter and position it on the base. Be sure to secure it properly to prevent any vibration or movement.
  4. Install the filter. Follow the manufacturer’s instructions carefully to ensure the filter is installed correctly. Make sure all hoses and fittings are tight and secure.
  5. Connect the plumbing. Attach the hoses between the pool, the pump, and the filter. Be sure to use appropriate connectors and clamps.
  6. Prime the pump. Fill the pump housing with water until it overflows. This ensures that the pump is filled with water and ready to operate.
  7. Start up the system. Turn on the power and let the system run for a few minutes to remove air from the plumbing.
  8. Test the water. Use a pool test kit to determine if the water is balanced and safe for swimming. Adjust chemicals as needed.

Setting up pool filtration equipment may seem intimidating, but if you take your time and follow these steps carefully, your pool will be ready for plenty of summer fun!

Monitoring The Drainage System

Monitoring the drainage system is crucial to prevent flooding and other water-related damages. Here are some ways in which you can monitor the drainage system:

  • Install sensors: You can install sensors that detect the drainage system’s water levels and flow rate. These sensors can alert your phone or computer, notifying you of any changes or abnormalities.
  • Conduct regular inspections: Regular inspections of the drainage system can help you identify any potential issues before they become major problems. Inspect the drainage system for any obstructions, damage, or signs of wear and tear.
  • Use remote monitoring systems: Remote monitoring systems allow you to monitor the drainage system remotely. Some systems use cameras to monitor visually, while others use sensors to detect water levels and flow rates.
  • Keep records: Keeping records of rainfall and flood levels can help you identify patterns and predict potential issues with the drainage system. This data can also be useful for future planning and improvements to the drainage system.

Troubleshooting Common Pool Draining Issues

Pool draining can present several issues that could leave you wondering what went wrong. Here are some common pool-draining issues that you can troubleshoot:

  • Draining too much water: The pool’s water levels vary according to the size and shape of the pool. If you’re unsure how much water to drain, consult the pool manufacturer’s guide. Remember not to drain more than two-thirds of the pool’s water, as draining all the water could damage the pool’s structure.
  • Slow draining: If the draining speed is slow despite opening the valve completely, it could indicate some debris is stuck in the drain. Try backing up the valve slightly to clear out the debris.
  • Inefficient pumping: Sometimes, draining issues occur due to problems with the pool pump. Check if the pump works correctly; if not, consider calling a professional.
  • Unwanted air bubbles: Another problem that may occur is the presence of air bubbles in the pump. This could indicate that the pump lid is not adequately sealed, leading to air mixing with water. In this case, tighten the pump lid or lubricate the O-ring.
  • Pool damage: Draining the pool without proper precautions could damage the pool’s structure. Before you start draining, ensure that the pool’s lining is in good condition and that no cracks could lead to water seeping through.

Maintaining A Healthy Pool Draining System

Maintaining a healthy pool draining system is crucial to your pool’s overall health and cleanliness. Here are some tips to help you keep your pool draining system in good working order:

  • Regularly inspect and clean your pool’s drains and skimmers to ensure they are not blocked by debris.
  • Regularly test your pool’s water levels to ensure the correct pH balance and chemical levels.
  • Ensure that your pool pump and filter are functioning correctly and maintain regularly.
  • Be mindful of the type of chemicals and cleaning products you use in your pool, as some can degrade the integrity of your pool drains and skimmers over time.
  • Consider using a professional pool maintenance service to help maintain your pool’s draining system if you’re unsure how to do it yourself.

Can I Drain My Pool Into The Storm Drain

Can I Drain My Pool Into The Storm Drain?

Draining your pool into the storm drain is generally not recommended as it can cause environmental harm. The water from your pool contains chemicals and contaminants that can harm aquatic life and pollute waterways. It is best to consult with your local municipality or pool professional for proper disposal methods.

In some areas, permits may be required for pool draining which may involve pumping the water into the sewer system or onto your property if you have proper drainage facilities. Following local regulations and guidelines is important to avoid any negative environmental impact.

Is It Illegal To Drain Your Pool Into The Street?

Yes, it is often illegal to drain your pool into the street. Most cities and counties have regulations prohibiting pool water’s discharge into the storm drain system, which can often lead to pollution of local waterways.

Instead, homeowners are typically required to drain their pools into the sewer system or use certain pool water disposal methods approved by local authorities. It’s important to check with your local government or pool maintenance company to determine the appropriate method for draining your pool and to avoid any potential legal or environmental issues.

Where Can I Drain My Pool Water?

Generally, the best place to drain pool water is in an area without plants or vegetation, such as a gravel-lined area or an area otherwise covered by some kind of protective barrier. This will help prevent pool water from entering the soil and damaging nearby plants, trees, or grass.

If you need to drain your pool water, there are several options available to you:

  1. Use the local sewer system – check with your local government for regulations and guidelines on draining pool water into the sewer system.
  2. Use a sump pump to drain the water into your yard or a nearby storm drain – check with your local authorities to ensure this is allowed in your area.
  3. Use a pool water delivery service – some services will drain your pool and refill it with fresh water for a fee.

Regardless of your choice, follow the proper procedures and regulations to avoid potential fines or environmental damage.

How To Drain Pool Without Killing Grass?

Draining a pool can be tricky, as the chlorine and other chemicals in the water can kill grass and plants. Here are a few tips to help you drain your pool without harming your lawn:

  1. Turn off the pool equipment and let the water sit for a few days. This will give the chlorine and other chemicals time to dissipate, making the water safer for your grass.
  2. Use a pool cover pump to drain the water. These pumps are designed to remove water from pool covers and can be used to drain your pool.
  3. Drain the water slowly, and spread it over a large lawn area. This will help dilute the chlorine and other chemicals, reducing the risk of damage to your grass.
  4. Monitor the pH levels of the water as you drain it. If the pH is too low, it can cause acidity in the soil, harming your grass. Test the pH regularly and adjust the water as needed.
  5. Consider using a water treatment or filter system to remove the chlorine and other chemicals from the water before you drain it. This can help keep your lawn healthy and green.

How To Empty Pool Without Flooding Yard?

Draining a pool can be daunting, especially if you’re a beginner. The last thing you want to do is flood your yard with water from the pool. Thankfully, with the right approach and a few simple steps, you can safely drain your pool without damaging your yard.

There are a few ways to empty a pool without flooding your yard:

  1. Use a submersible pump: You can use a submersible pump to siphon out the water in a controlled manner. Place the pump at the bottom of the pool and let it do the work for you.
  2. Hire a professional pool company: If you’re unsure how to drain your pool without flooding your yard, consider hiring a professional pool company. They will have the experience and equipment to do the job without damaging your yard.
  3. Use a backwash hose: This is a method where you attach a backwash hose to your pool filter and then turn on the backwash setting. This will pump water out of the pool and through the hose, emptying the pool gradually without causing any flooding in your yard.

Whatever method you choose, always remember to be cautious and take the necessary precautions to prevent damage.


In conclusion, draining a pool into your yard is a relatively simple process that can save you money and time. Following the steps outlined in this guide, you can do it safely and effectively with minimal risk to your property and environment. With careful planning and consideration, you can drain your pool and keep your yard looking great.

Frequently Asked Questions:

Is it safe to drain pool water into the yard?

No, it is not safe to drain pool water into your yard. Pool water contains various chemicals, such as chlorine and other pool additives, which could harm your yard and the environment. You should always consult with your local municipality for the proper way to dispose of pool water.

Where should pool water be drained to?

Pool water should be drained to a sanitary sewer, a storm drain, or a dry well.

How do I drain my pool without flooding my yard?

Using a submersible pump is the best way to drain your pool without flooding your yard. This type of pump is designed to be submerged in the pool water and can be used to direct the water away from the pool and into a separate area designed to take the water, such as a drain or a collection point. You should also ensure that the area where you are draining the pool is sloped away from the pool and your other landscaping features to prevent any backflow of water.

Can I drain pool water into the street?

No, you should not drain pool water into the street. Pool water often contains chemicals and other substances that can pollute waterways, so it should be disposed of properly. Contact your local municipality to find your area’s proper disposal methods.

What type of pump do I need to drain a pool into my yard?

You will need a submersible pool pump. This type of pump is designed to be submerged in the pool and can drain the water from and into your yard.

How long does it take to drain a pool safely?

The amount of time it takes to drain a pool safely depends on the size of the pool and the type of pump used. Generally, completely draining a pool can take a few hours to a few days.

Is it safe to drain a pool into my yard?

No, it is not safe to drain a pool into your yard. This can cause water damage to your yard and potentially contaminate your soil with hazardous chemicals in pool water. It is best to consult a professional for the safest and most efficient way to drain your pool.

Is there a risk of soil erosion when draining a pool into the yard?

Yes, soil erosion is risky when draining a pool into the yard. Runoff from the pool water can erode soil and carry sediment, nutrients, and other pollutants into nearby creeks, streams, and other bodies of water. To prevent soil erosion, a buffer zone of vegetation, such as grass or shrubs, should be established between the pool and the yard, and the water should be drained slowly and away from the yard.